Canon XU-81 Operation Manual page 23

WARNING
1. Never attempt to connect or disconnect the power cord by taking hold of the plug with wet hands.
Doing so may cause electric shocks.
2. Ensure that the plug is pushed all the way into the power outlet.
3. Always grasp the plug when connecting or disconnecting the power cord. Pulling on the cord may
break its wires or otherwise damage the cord. Power may leak from a damaged cable, causing a fire
or electric shocks.
4. Use the included power cable to connect to a power supply (rated 12Vdc). (Positive and negative
polarity is shown below.) When using a commercial AC adapter, choose the one in comformity with the
safety standards (the rated 12Vdc, minimum 2A).
＋ Positive(core)
CAUTION
1. Never connect or disconnect cables until making certain that the power is turned off. Doing so may
cause electric shock or damage.
2. Make sure to connect the power cord with the correct polarity (plus and minus). Connecting the cord
with the wrong polarity may cause a short circuit or damage the power supply unit or power cord.
WARNING
1. Do not allow the pan-tilt head or the inside of the housing to become wet, and do not allow water
to enter inside or to be spilled onto the head. Do not put any object which contains liquid such as a
drink or a vase on this product. If water has found its way inside the unit, stop using it immediately.
Continuing to use the unit is a fire or electric shock hazard.
2. Do not attempt to disassemble or remodel the unit. Intermeshing gears are to be found inside the unit,
and contact with them may cause injury.
3. When the unit is to be approached, communicate with the operator of the unit while making the
approach. Injury may result if the unit should operate unexpectedly when it is being operated by
remote control.
4. Do not drop the unit, bump into other objects or otherwise subject it to strong impact. If the main unit
has been damaged, switch off the power immediately, and disconnect the power plug from the power
outlet. Then contact your dealer or your Canon representative.
5. Please do not turn the lens toward the sun. When a strong light enters at the TELE side, it can cause
damage to the lens and the camera.
POWER SUPPLY
− Negative
HANDLING THE UNIT
− Negative
＋ Positive(white line)
E3