Table of Contents
Advertisement
7 Assembly
7.1 Unpacking the hydraulic power unit
▶
Only open the packaging from the top.
▶
Before opening the packaging and/or loosening the tension belts, make sure that
the hydraulic power unit cannot fall over.
▶
Remove the packaging of the hydraulic power unit.
▶
Check the hydraulic power unit for obvious defects, for example transport
damage, leakage or other external damage, and for completeness. See chapter 4
"Scope of delivery".
▶
Use the hydraulic power unit only in technically perfect condition.
▶
Dispose of the packaging material in accordance with the national regulations in
your country and/or your company-internal specifications/procedures.
7.2 Installing the hydraulic power unit
Falling, tumbling or uncontrolled position change of the hydraulic power unit!
Risk of injury! Damage to property!
▶
Make sure that the hydraulic power unit is only installed and assembled by
qualified personnel. See chapter 2.4 "Qualification of personnel".
▶
Observe the information on handling the product in chapter 6 "Transport and
storage".
▶
Position the hydraulic power unit on a suitable foundation.
▶
Observe the specifications on the total weight.
Damage to the surface/oil tank due to rough handling and incorrect positioning!
Damage to property!
▶
Make sure that the hydraulic power unit is correctly positioned.
▶
Make sure that the clip of the assembly aid is correctly positioned. See also
fig. 9 and 10.
Vibrations in the environment!
Damage to property!
▶
Use vibration dampers like damping mats.
▶
Connect the hydraulic power unit to the machine via hydraulic hoses. Do not use
any rigid pipelines.
To install the hydraulic power unit you should proceed as follows:
▶
Place the hydraulic power unit on a level surface, preferably an installation plate
(mounting kit, optionally available, see chapter 17.3 "Accessories").
WARNING
NOTICE
CytroPac, RE 51055-B/06.17, Bosch Rexroth AG
Assembly
29/84
Hide quick links:
Advertisement
Table of Contents
