Table of Contents
Advertisement
44/72
A10FZO, A10VZO, A10FZG and A10VZG series 10 | Installation
Bosch Rexroth AG, RE 91485-01-B/2021-11-18
Caution! Operation with spacers!
Operating the axial piston unit with spacer may result in damage to the
axial piston unit.
▶ Remove the spacer prior to commissioning.
▶ Remove the spacer (1).
The spacer must be removed before the second pump is fitted. If you operate
a further axial piston unit without installing an additional pump on the through
drive, it is absolutely necessary to remove the spacer and the hub. Since the
metallic protective cover (3) is not pressure-resistant, it must be replaced with
a pressure-resistant cover. If you need a pressure-resistant cover, contact your
Bosch Rexroth Service partner. Use a suitable tool for this to prevent damage
to the functional surfaces. If functional surfaces are damaged, contact your
Bosch Rexroth service partner or the service department of the factory that
manufactured the axial piston unit.
7�5�6 Completion of assembly
1� Remove any installed transport screws.
CAUTION! Operation with protective plugs!
Operating the axial piston unit with protective plugs may result in injury or damage
to the axial piston unit.
▶ Before commissioning, remove all protective plugs and replace them with
suitable, pressure-resistant, metal threaded plugs or connect the appropriate
lines.
2� Remove the transport protection.
The axial piston unit comes with protective covers (1), (3) and protective
plugs (2). (1) and (2) are not pressure-resistant and have to be removed prior
to connection. Use a suitable tool for this to prevent damage to the sealing and
functional surfaces. If sealing or functional surfaces are damaged, contact your
Bosch Rexroth service partner or the service department of the manufacturer's
plant of the axial piston unit.
1
2
Abb� 25: Removal of transport protection, example A10FZO and A10VZO
1 Protective covers
2 Protective plugs/threaded plugs
3
1
4
1
3 For version with through drive,
protective cover and mounting bolts
4 Transport protection for the through
drive
3
2
4
1
2
Advertisement
Table of Contents
