Assembly; Unpacking; Installation Requirements; Installation Position - Bosch rexroth EL 2 Assembly Instructions Manual

7 Assembly

7.1 Unpacking

Malfunctions due to incorrect assembly and start-up
The product can get damaged and its service life shortened.

When unpacking the product, do not lift it by the platform.

Lift the product out of its packaging.

The protective covers are covered with protective fi lm. Only remove this once the
protective covers have been installed

Dispose of the packaging material in accordance with the applicable regulations
in your country.

7.2 Installation requirements


During installation, be sure to maintain the ambient conditions specifi ed in
the Technical Data (see page 51).
7.2.1

Installation position


Install the product level and plumb, at right angles, and axially parallel.
This ensures proper functioning and prevents premature wear.

7.3 Required tools

• Hex wrenches (open-ended spanners) SW8, SW10, SW13, SW17, SW19.
• Hex socket wrenches SW3, SW4, SW5.
• Hexagon socket wrenches (Torx™) T30, T50
• Phillips screwdriver, PZ2
• Hammer
• Spirit level
• Combination pliers
• Flat smooth fi le
NOTICE
3 842 558 372/2021-10, MIT: EL 2, Bosch Rexroth AG
Assembly 15/56