Yamaha MTX Series Setup Manual page 95

4.
For CHANNEL, click [1] and then click [Close] button.
The YDIF 1 input routing select button shows that CH1 of the EXi8 whose UNIT ID = 02 has been assigned to
YDIF 1.
5.
Verify that for the MTX5-D with UNIT ID = 01, the buttons located below YDIF 5 through
YDIF 8 are set to OUT5 (OUTPUT 5) through OUT 8 (OUTPUT 8) respectively.
If the settings are different, click the button and change the setting.
Example 4) A system using Dante
MTX Setup Manual
95