Yamaha MTX Series Setup Manual page 129

8.
Set the PGM1's [UNIT ID] rotary switch and DIP switch.
If the device is not nearby, you can set it during the step
Make the following settings.
PGM1
9.
When you've finished setting the PGM1's [UNIT ID] rotary switch and DIP switch, click
[Next>].
10.
Select the Mini-YGDAI card, and click [Next>].
Since a Mini-YGDAI card is not used in this example, leave this as [No Assign] and click [Next>].
Example 5) A system using the PGM1 for paging
"Connecting the equipment."
UNIT ID = 60
[UNIT ID] rotary switch = 0
DIP switch = 2 and 3 are ON (downward),
others are OFF (upward)
129
MTX Setup Manual