Philips Hadco ZoneScape 1-A Documentation page 28

I have reinstalled the ZoneScape App
and I cannot see the schedules that I
have previously configured.
ZoneScape 1-A module documentation
defaults mode. Then try to
access ZoneScape and connect
via WiFi to the module and use
the default key "12345678"
 After Applying factory defaults,
please make sure that you have
edited and applied the settings
written on page 5 of this Manual
 The current implementation
saves the schedules both in
ZoneScape App database and
also saves the schedule in the
Actual unit, however there is no
read schedules feature
implemented currently that will
read the existing schedules set in
ZoneScape.
.
Proposal Page 28 of 28