Philips Hadco ZoneScape 1-A Documentation page 14

In order to pair unit 2(Client) to unit 1 (AP) in our example you need to change:
1. Net Mode - WIFI(CLIENT)-SERIAL should be Selected
2. SSID: You need to either enter "ZoneScape" in this field or click "scan" and
select ZoneScape from the scan results list.
3. Password: You need to enter the ZoneScape unit one key in this field
4. IP Type: Choose STATIC from the drop down selector.
5. IP Address : You need to enter an IP different to 192.168.16.254. In the
example below the IP 192.168.16.253 is selected.
6. Subnet Mask : Enter 255.255.255.0
7. Default Gateway: 192.168.16.254
8. Primary DNS Server: 192.168.16.254
ZoneScape 1-A module documentation
.
Proposal Page 14 of 28