Specifications; Control Buttons - Philips Hadco ZoneScape 1-A Documentation

ZoneScape 1-A module documentation
.
By tapping on the "Name" text field the user is able to change / edit the unit name
and the module TCPIP parameters. By tapping on "Save" button the settings are
saved in the Database, and the UI is updated with the new settings and the newly
entered Unit name.

Specifications

This section contains technical specifications regarding the ZoneScape module ,
inputs, outputs and physical control options.

Control Buttons

ZoneScape is equipped with a "All On" and "All Off" physical switch positioned on
the right side of the module next to the door lock. The "All On" and "All Off" buttons
are push buttons. With these buttons the user can turn ON and OFF all of the four
zone Relays simultaneously for testing. After pushing the "All On" pushbutton all the
Zone Relays will be turned on and respectively if there are any lights wired to the
ZoneScape outputs , the lights will lit. When the "All Off" pushbutton is pushed all
the zone relays will be switched off. If there is a schedule set, this schedule will be
executed and the respective output will be turned off even if the user has previously
pushed the "All off" buttons. These buttons will not cancel any schedules set. For
Safety Maintenance the user should disconnect the power from the power
transformer before the relevant ZoneScape module.
Proposal Page 24 of 28