Configuring Daily Repeats Schedule - Philips Hadco ZoneScape 1-A Documentation

Configuring Daily Repeats schedule

Configuring a Everyday repeats schedule is when the user want to trigger / turn on
After a successful transmission the newly created schedule will appear in the list of
schedules tab as follows:
The List of schedules include all the configured schedules for the target ZoneScape
unit.
ZoneScape 1-A module documentation
and off on or more of the lights / zones on a daily basis
/ every day. First the user needs to select a target light
/ lights for this schedule. Once the light is selected the
"Everyday" submenu tab needs to be selected . Then
the user needs to select a start date / time for this
schedule and end date time for this schedule. Then in
order to send and apply the schedule to the
ZoneScape board the user needs to tap on the "OK"
button. The application will try to establish a
connection with the target ZoneScape board and once
established the configured schedule will be sent and
applied to the target ZoneScape board. Once the user
taps on the "OK button" a new progress dialog pops up
informing the user that the settings are being sent to
the target ZoneScape board. On a successful
transmission the dialog should close after a 1 - 2
seconds.
.
Proposal Page 10 of 28