Table of Contents
Advertisement
Connect the Thermostat
Step 1:
Plug the thermostat cable into the socket on the main unit.
Step 2:
Attach the thermostat to the mounting
bracket.
Step 3:
Secure the thermostat mounting bracket
to the unit with a small black screw on
each side.
Step 4:
Tape the probe to the top of the
cooling unit to prevent damage
during rack installation.
Connect the Cooling Unit to the
Electrical Outlet
The power cord is located on the left side of
the unit. Route the power cord over the top of
the unit and towards the ceiling to reach the
power outlet.
IMPORTANT: Do not connect the wine vault
power cord at this time.
IMPORTANT: If the wine vault is installed in an
area that is under construction, cover the entire
outside of the cooling unit with plastic. This will
help prevent drywall dust and other debris from
entering the wine vault.
Do not operate the cooling unit until the location
is cleared of debris.
Drain Line Connection
All units are equipped with a drain port for
additional removal of excess condensation in
high humidity areas. A drain line may need to
be attached to allow the condensation to drain.
A means to catch the condensation will need to
be placed below the drain line.
Drain line port
23
Advertisement
Table of Contents
