Table of Contents
Advertisement
Extend the Wall Panels
Step 8:
Continue installing the two 48"
wide side panels. Check to be sure
panels are aligned at the top. Lock
the panels together.
Installing the Door Support
Brackets
Step 9:
Remove the door opening spacer
template. Cut notches to permit the
door jamb brackets to be installed
flush on each side of the door
opening. Slide the brackets into the
channel recesses until they are
flush and secure the brackets to
the base channels with screws or
pop rivets. See illustration at right.
Base
Secure with
channel
screws or rivets
Notch in
base
channel
recess
Top view
Bracket
End view
13
Advertisement
Table of Contents
