Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
ASSEMBLE WALL AND CEILING PANELS
Install the Door Panel
BEFORE YOU BEGIN: Check the door opening
between the base channels to be sure it
measures 31-1/16" . Check the door opening on
the door panel assembly to be sure it will fit.
Slight manufacturing variations may cause an
uneven door fit.
Step 1:
Remove the banding and spacer
block from the bottom of the
door panel.
Step 2:
With two people inside and one or
two people outside, lift the door
panel section into place. Secure the
panels with the locking connectors.
IMPORTANT: The door panel is very heavy.
Four people should carry and install this
door panel.
I
Make sure the door is locked. Do not allow the door to swing open when lifting
I
the panel.
I
Do not drag the panel on the bottom end across the floor. The door sweep
I
can be easily damaged.
Install the Left Front Corner
Step 1:
Install the left front corner panel,
securing it to side wall and door
section with the locking connectors.
14
Advertisement
Table of Contents
