14
5. Inspect the front panel display (FPD) lock and swivel mechanism.
Inventory the System
Now that the system is in its final setup location, perform the following steps:
1. Unpack the accessories.
2. Inventory all items to ensure serial numbers match the packing list, and are present.
3. Contact Siemens immediately if the packing list and peripherals delivered do not match
or are missing.
Power Up the System
1. Connect the system AC power cord to an approved external power source. Ask the cus-
tomer is unsure which outlet to use.
2. Switch the MAIN circuit breaker to the on position.
- I = ON (up)
- 0 = OFF (down)
Fig. 7:
Pos. 1
Pos. 2
Pos. 3
Pos. 4
ACUSON S2000
NOTE
Always set the brakes once the system is in position. Never
leave the system without setting the brakes.
AC Power Panel
MAINS Circuit Breaker (up = ON, down = OFF)
Battery LED
AC OK LED
Bootup LEDS (all ON/green during bootup)
US15-101.812.01.02.02
05.10
System Delivery Procedure
Page 14 of 40
Ultrasound
0
0
Siemens