Table of Contents
Advertisement
System Delivery Procedure
3. Verify the following LED states:
a) Verify the Power Button flashes green.
Fig. 8:
b) Verify the lower-rear panel AC OK LED illuminates green. Reference
(3/Fig. 7 / p.
c) Verify the lower-rear panel Battery LED (below the AC OK LED) illuminates green.
Reference
4. Press the Power button. Reference
5. Verify that the following occurs within the first four seconds of the boot sequence:
a) The lower-rear panel LEDs 1,2,3,4,5, and 6 illuminate green. Reference
(4/Fig. 7 / p. 14)
Siemens
S2000 Control Panel Power Button
14).
(2/Fig. 7 / p.
US15-101.812.01.02.02
05.10
14).
(Fig. 8 / p.
15).
Page 15 of 40
Ultrasound
15
ACUSON S2000
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ACUSON S2000 and is the answer not in the manual?
Questions and answers
I can't determine the orientation of the transvaginal probe.
The orientation of the transvaginal probe for the Siemens ACUSON S2000 is determined by selecting the connected transducer from the transducer list on the monitor. The system recognizes the transducer when its name is displayed. The probe frequency is set between 4–9 MHz, and the examination is performed with the patient in the conventional supine position or lateral recumbent position if needed. The bladder is filled before the examination. The probe is used to perform a two-dimensional and color Doppler scan of the relevant anatomical structures.
This answer is automatically generated