Cab Maintenance; Cleaning The Cab; Filling The Washer-Fluid Bottle; Cleaning The Cab Air Filters - Toro Groundsmaster 360 31223 Operator's Manual

Cab Maintenance

Cleaning the Cab

Important:
Use care around the cab seals and
lights (Figure 52). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
Figure 52
1. Seal
2. Light
Filling the Washer-Fluid
Bottle
1. Perform the pre-maintenance procedure; refer
to Preparing the Machine for Maintenance (page
34).
2. Open the hood and locate the washer-fluid bottle
(Figure 53).
g034330
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
Washer-Fluid Bottle with Washer-Fluid Symbol
3. Fill the bottle with washer fluid as needed.
4. Close the hood.

Cleaning the Cab Air Filters

Service Interval: Every 250 hours
1. Remove the screws and grates from both the
in-cab and rear cab air filters
Figure 55).
1. Filter
2. Grate
52
Figure 53
(Figure 54
Figure 54
In-Cab Air Filter
3. Screw
g028438
and
g028378