Zone Runtimes Setup; Water Now; Manually Activate A Schedule - Toro EVOLUTION Series User Manual

Zone Runtimes Setup

The Zone Runtimes is where you select all the zones that will run in the schedule. By default, all zones are set to OFF. Modify the runtime
for each zone as necessary. Deactivate a zone by setting the runtime to OFF.
Step 1
– Press the SCHEDULES button.
Step 2
– (For controllers with multiple active schedules only.)
Use the Up
enabled, move to Step 3.
Note: The Schedule and Zone names can be customized using the EVOLUTION
www.toro.com/evolution.
Step 3
– Use the Up
Step 4
– Use the Up
SCHEDULE
ZONE 1
ZONE 2
3:FRONT YARD
4:BACK YARD
ZONE 5
Step 5
– Use the Up
Step 6
– Repeat Steps 4 and 5 for the remaining Zones. Set the Zone to OFF to disable.
Step 7
– Press the BACK

Water Now

Water Now is used to manually activate a schedule, zone(s), or to test all zones.

Manually Activate a Schedule

Step 1
– Press the WATER NOW button.
Step 2
– Use the Up
The selected schedule will run and activate all assigned zones.
(For controllers with multiple active schedules only.)
Use the Up
WATER NOW
SCHEDULE A
SCHEDULE B
ZONES
Note: The Schedule name can be customized using the EVOLUTION
www.toro.com/evolution.
Step 3
– Press BACK to return to the previous menu or
or Down arrows to select the Schedule you want to edit. Press SELECT
or Down arrows to navigate to ZONE RUNTIMES. Press SELECT
or Down arrows to navigate to the ZONE you want to set or edit. Press the Right
00:15
00:05
00:15
00:20
OFF
or Down arrows to set the desired runtime for that particular zone. Press SELECT
arrow to return to the previous menu or
or Down arrows to navigate to SCHEDULE. Press SELECT
or Down arrows to select the Schedule you want to activate. Press SELECT
HOME to return to the main screen.
TM
Software which can be accessed at
HOME to return to the main screen.
. If only Schedule A is
TM
Software which can be accessed at
.
arrow or SELECT
to save.
. Watering will begin.
.
.
11