Help/Setup; Alerts; Contact Toro; Set Time/Date - Toro EVOLUTION Series User Manual

Help/Setup

Alerts

TM
The EVOLUTION controller always checks the system for proper function and it will provide feedback if it detects any system
abnormality. The Alerts menu allows you to view and clear detected system faults.
Alert Listings
Short - EVOLUTION
TM
detected a short in the zone.
- EVOLUTION
current rating.
- EVOLUTION
display again unless a Factory Reset is performed.
- EVOLUTION
- EVOLUTION
- EVOLUTION
Clearing an Alert
You can clear an Alert individually or use the CLEAR ALL command to erase them all.
Step 1
– Press HELP/SETUP.
Step 2
– Use the Up
Step 3
– Use the Up
ALERTS
CLEAR ALL
LOW BATTERY
Step 4
– Use the Up
Local Contact
Available only when your local distributor or dealer has programmed the local contact information in the controller.

Contact Toro

Access Contact Toro to get the latest contact information.
Step 1
– Press HELP/SETUP.
Step 2
– Use the Up
CONTACT TORO
US +1(800)367-8676
TORO.COM/EVOLUTION
FOR GLOBAL SUPPORT
SEND EMAIL TO
EVOLUTION@TORO.COM

Set Time/Date

Step 1
– Press the HELP/SETUP button.
Step 2
– Use the Up
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
Step 3
– Use the Up
Right arrow or SELECT
22
TM
detected an over current in the zone. Over current occurs when a terminal exceeded the recommended
TM
detected no battery installed or the battery's power is low. Once the Low Battery alert is cleared, it will not
TM
detected low or no A/C power.
TM
encountered an error that required the system to reset to the factory defaults.
TM
encountered a communication error.
or Down arrows to select the Alerts. Press SELECT
or Down arrows to select individual alerts or CLEAR ALL. Press SELECT
or Down arrows to confirm (Yes) or cancel (No). Press SELECT
or Down arrows to select the Alerts. Press SELECT
or Down arrows to navigate to SET TIME/DATE. Press SELECT
or Down arrows to select TIME or DATE. Navigate to the TIME or DATE parameters using the
.
(Continued to the next page.)
.
.
.
.
.