Zone Runtimes Setup - Toro EVOLUTION Series Quick Start Manual

Zone Runtimes Setup

The Zone Runtimes is where you select all the zones that will run in the schedule. By default, all zones are set to OFF. Modify the runtime for each zone as
necessary. Deactivate a zone by setting the runtime to OFF.
Step 1 – Press the
Step 2 – (For controllers with multiple active schedules only.)
Use the Up
move to Step 3.
Note: The Schedule and Zone names can be customized using the EVOLUTION
www.toro.com/evolution.
Step 3 – Use the Up
Step 4 – Use the Up
Press the Right
Step 5 – Use the Up
Step 6 – Repeat Steps 4 and 5 for the remaining Zones. Set the Zone to OFF to disable.
Step 7 – Press the BACK
14
SCHEDULES button.
or Down arrows to select the Schedule you want to edit. Press SELECT
or Down arrows to navigate to ZONE RUNTIMES. Press SELECT
or Down arrows to navigate to the ZONE you want to set or edit.
arrow or SELECT .
or Down arrows to set the desired runtime for that particular zone. Press SELECT
arrow to return to the previous menu or
Software which can be accessed at
®
.
HOME to return to the main screen.
. If only Schedule A is enabled,
SCHEDULE
ZONE 1
ZONE 2
3:FRONT YARD
4:BACK YARD
ZONE 5
to save.
00:15
00:05
00:15
00:20
OFF