Kenwood NX-5000 Series Common Function Reference page 447

19 CONFIGURATION FOR EACH FUNCTION
19.3 Available Functions for the Selector
19.3 Available Functions for the Selector
Supported Models: Portable
By using KPG-D1/ D1N, the following functions can be assigned to the Selector. What function can be selected varies
depending on the configuration in 16 Zone/Channel Selector.
0
If 16 Zone/Channel Selector is enabled
Function Name
No function is activated. Rotating the Selector causes the Key-entry Error
None
Tone (1 beep) to sound.
Rotating the Selector causes the transceiver to migrate to the channel
Channel Select
having the same number specified by the pointer of Selector.
Rotating the Selector causes the transceiver to migrate to the zone
Zone Select
indicated by the pointer of the Selector.
Turning the Selector causes the transceiver to migrate to the site specified
Site Select by the Selector. (Refer to NXDN FUNC
Lock/ Site
ALL indicates a function that can be used in all systems.
*1
0
If 16 Zone/Channel Selector is disabled
Function Name
No function is activated. Rotating the Selector causes the Key-entry Error
None
Tone (1 beep) to sound.
Channel Up/ Rotating the Selector causes the channel number to be increased or
Down decreased in steps of 1.
Rotating the Selector causes the zone number to be increased or
Zone Up/Down
decreased in steps of 1.
Turning the Selector increases or decreases the site number in steps of 1.
Site Up/Down (Refer to NXDN FUNC
Select).)
*1 ALL indicates that a function can be used in all the following communication systems:
Analog Conventional
0
P25 Conventional
0
P25 Trunking
0
NXDN Conventional
0
NXDN Trunking
0
DMR Conventional
0
Configuration using KPG-D1/ D1N
0
Assigning functions to the Selector of the transceiver (
0
Configuring 16 Zone/Channel Selector to be enabled or disabled (
Top/Side)
Common FUNC (K, F)/Ver 2.20
Table 19-4 Available Functions for the Selector
Description
Select).)
Table 19-5 Available Functions for the Selector
Description
Locking the Site to Be Used (Site Lock/ Site
Locking the Site to Be Used (Site
Transceiver Settings > Key Assignment > Top/Side)
Transceiver Settings > Key Assignment >
CONTENTS
Available
Communication
*1
Systems
ALL
ALL
ALL
NXDN Trunking
Available
Communication
*1
Systems
ALL
ALL
ALL
NXDN Trunking
416
INDEX