14 ADJUSTING THE TIME ON THE TRANSCEIVER
14.2 Adjusting the Time
14.2
Adjusting the Time
Pressing the Clock Adjustment key causes the transceiver to enter Clock Adjustment Mode and then date and time can
be adjusted.
Also, pressing the Menu key causes the transceiver to enter Menu Mode, and then the transceiver enters Clock Adjustment
Mode by selecting "Clock Adjustment" and the date and time can be adjusted. (Refer to
Note
When the data configured by using KPG-D1/ D1N is written to the transceiver, the date and time of the internal clock of
the transceiver can be adjusted by sending the date and time configured on the PC to the transceiver. (
> Write Data to the Transceiver > Time Adjustment)
Operating the transceiver
The following is the operation example when "Year/Month/Day" is configured in Date Format and "12H" is configured in
Time Format:
1
Press the
Clock Adjustment
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters Clock Adjustment Mode.
The following operations are the same even if the transceiver enters Clock
Adjustment Mode by pressing the Menu key.
2
Configure the year by pressing the
3
Configure the month by pressing the
Common FUNC (K, F)/Ver 2.20
key.
[
]
or
[
]
key, and then press the
[
]
or
[
]
key, and then press the
Using Menu
Mode.)
Clock Adjust
D a t e
1 3 / 0 4 / 1 9
T i m e
1 2 : 3 4 PM
O K
[
]
key.
Clock Adjust
D a t e
1 4 / 0 4 / 1 9
T i m e
1 2 : 3 4 PM
O K
[
]
key.
Clock Adjust
D a t e
1 4 / 0 5 / 1 9
T i m e
1 2 : 3 4 PM
O K
CONTENTS
INDEX
Program
12 : 34
A
M
Bac k
12 : 34
A
M
Bac k
12 : 34
A
M
Bac k
238