Kenwood NX-5000 Series Common Function Reference page 147

6 SOUND
6.2 Tones that Sound When the Transceiver Receives a Call
FleetSync
Alert Tone (Individual Call)
Alert Tone (Other Selective Calls)
Alert Tone (Paging Call)
Alert Tone (Status/Short Message Call)
Alert Tone (Emergency Response)
Configuration using KPG-D1/ D1N
0
Configuring various Alert Tones (P25 Conventional) (
Conventional > Alert Tone)
0
Configuring various Alert Tones (P25 Trunking) (
Alert Tone)
0
Configuring various Alert Tones (NXDN Conventional) (
Conventional > Alert Tone)
0
Configuring various Alert Tones (DMR Conventional) (
Conventional > Alert Tone)
0
Configuring various Alert Tones (NXDN Trunking) (
> Alert Tone)
0
Configuring various Alert Tones (DTMF) (
0
Configuring various Alert Tones (2-tone (Analog)) (
(2-tone 1 to 4))
0
Configuring various Alert Tones (2-tone (Digital)) (
tone 1 to 4))
0
Configuring various Alert Tones (2-tone (MDC-1200)) (
Information > General > Call Alert > Alert Tone)
0
Configuring various Alert Tones (2-tone (FleetSync)) (
> General > Alert Tone)
Common FUNC (K, F)/Ver 2.20
This tone sounds from the transceiver when the transceiver receives a
FleetSync Individual Call.
This tone sounds from the transceiver when the transceiver receives a
FleetSync Group Call, FleetSync Fleet Call, FleetSync Supervisor Call or
FleetSync Broadcast Call.
This tone sounds from the transceiver when the transceiver receives a
FleetSync Paging Call.
This tone sounds from the transceiver when the transceiver receives a
FleetSync Status/Short Message Call.
If Alert Tone is enabled for Emergency Status Response, this tone sounds
from the transceiver when the transceiver receives a FleetSync Emergency
Call.
Transceiver Settings > P25 > P25 Information >
Transceiver Settings > P25 > P25 Information > Trunking >
Transceiver Settings > NXDN > NXDN Information >
Transceiver Settings > DMR > DMR Information >
Transceiver Settings > NXDN > NXDN Information > Trunking
Transceiver Settings > DTMF > Decode)
Transceiver Settings > 2-tone > 2-tone (Analog) > Decode
Transceiver Settings > 2-tone > 2-tone (Digital) > Decode (2-
Transceiver Settings > MDC-1200 > MDC-1200
Transceiver Settings > FleetSync > FleetSync Information
CONTENTS INDEX
116