Kenwood NX-5000 Series Common Function Reference page 17

About the Built-in GPS Receiver Unit
About the Built-in GPS Receiver Unit
The GPS receiver is built-in for NX-5200/ NX-5300/ NX-5400/ NX-5700/ NX-5800/ NX-5900. Read the following warnings
before using the built-in GPS receiver unit of NX-5200/ NX-5300/ NX-5400/ NX-5700/ NX-5800/ NX-5900.
0
On the use of the GPS
With frequency interference in the GPS receive frequency range to the transceiver or another transceiver, the GPS
receiver may not position normally.
1. If the GPS receiver positions during transmission:
The GPS receiver may be unable to position if the transmit spurious emission of the transceiver interferes within the
0
GPS receive frequency range.
The interference to the GPS receiver changes depending on the transmission power of the transceiver. Greater
0
transmission power results in the higher possibility of being unable to position.
2. If the GPS receiver positions during reception:
The GPS receiver may be unable to position if the harmonics of the oscillator equipped in the transceiver interfere
0
within the GPS receive frequency range.
3. Effects of other interfering frequencies (such as if other transceivers transmit):
If even transmit and receive frequencies other than the above, the GPS receiver may be unable to position if
0
frequencies emitted from other transceivers and electronic equipment interfere within the GPS receive frequency
range.
0
As the built-in GPS receiver unit consumes more power when powered on compared to when powered off, the battery
life of the transceiver becomes shorter compared to when the built-in GPS receiver unit is powered off.
0
If the clock in the transceiver is not configured, a cold start always occurs. Therefore, the time until the start of positioning
is longer. (Refer to Adjusting the
How to Search for Information
For your convenience of reading through this document using Adobe Acrobat or Adobe Reader, a link to a corresponding
item is pasted in the Contents page, Index page, the lower part of each page and in the context. Clicking the portion where
a link is pasted enables a jump to the corresponding page.
Placing a pointer over the portion where a link is pasted changes the shape of the pointer to a hand (U).
CONTENTS
Clicking a title in the Contents page allows a jump to the corresponding page.
Common FUNC (K, F)/Ver 2.20
Time.)
CONTENTS INDEX
xvi