Tx Digital Audio Response - Kenwood NX-5000 Series Common Function Reference

6 SOUND
6.7 Configuring Audio Profile (Audio Profile)

TX Digital Audio Response

The following are the common functions of the audio profile related to transmission:
Auto Gain Control (TX Audio Response)
0
Audio Equalizer (TX Audio Response)
0
These functions can be used only in a P25 system, NXDN system, and DMR system.
Auto Gain Control (TX Audio Response)
Auto Gain Control (TX Audio Response) is the function to adjust the volume level of the transmitted audio. When the
volume level of the transmitted audio is adjusted by automatically increasing or decreasing the microphone sensitivity, the
transmitted audio can be heard clearly in the receiving transceiver.
The volume level of the transmitted audio may vary depending on the voice level of a user talking to the transmitting
transceiver and the distance between the microphone and the mouth. In this case, the use of this function automatically
adjusts the microphone sensitivity, so that the transmitted audio can be heard clearly in the receiving transceiver.
If the background noise is loud, the microphone sensitivity may not be properly adjusted. In this case, a user needs to hold
the microphone closer and speaks loudly.
Auto Gain Control
Auto Gain Control (TX Audio Response) is enabled and the volume level of the transmitted
On
audio is automatically adjusted to the proper volume level.
Auto Gain Control (TX Audio Response) is disabled and the volume level of the transmitted
Off
audio is not automatically adjusted.
Note
The transceiver enters Menu Mode by a user pressing the Menu key, and then the transceiver enters TX Auto Gain
Control Mode by a user selecting "TX Auto Gain Control". In TX Auto Gain Control Mode, the configuration in Auto Gain
Control (TX Audio Response) can be changed.
Configuration using KPG-D1/ D1N
Configuring Auto Gain Control (TX Audio Response) (
> TX Audio Response (Digital))
Audio Equalizer (TX Audio Response)
Audio Equalizer (TX Audio Response) is the function to adjust audio characteristics to be applied when the received audio
is played back. Audio Equalizer (TX Audio Response) is applied to a transmitted audio played back by the receiving
transceiver.
Also, the received audio may sound differently depending on an usage environment of the transceiver, and effects of a
microphone equipped with the transceiver and external connector devices. Use of this function allows a user to select
according to user convenience or preference an audio characteristic of the transmitted audio inputted to a microphone.
By using KPG-D1/ D1N, the transmitted audible characteristics can be configured in the range between -10 dB and +10 dB
for each of the High, High Midrange, Midrange, Low Midrange and Low audio frequency.
Common FUNC (K, F)/Ver 2.20
Table 6-19 Auto Gain Control (TX Audio Response)
Description
Transceiver Settings > Audio Profile > Advanced Settings
CONTENTS
134
INDEX