Received Audio And Beep (Multi Rf Deck Audio Output Type) - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function
Note
When Public Address is enabled, the PTT switch can be operated on both Control Heads, but the PTT switch pressed
0
earlier becomes enabled. At this time, while the PTT switch of one Control Head is being pressed, nothing behaves even
if the PTT switch of the other Control Head is pressed.
The volume of an external speaker while Public Address is functioning varies in conjunction with the volume of the
0
Control Head configured in Master Volume Control.
When an external speaker (KES-3 or KES-5) is not connected to RF Deck 1, the audio of Public Address is emitted from
0
Control Heads. If the external speaker is disconnected from RF Deck 1 while Public Address is enabled, the output is
switched to the output of the Control Heads.
Configuring the Output Method of the Received Audio and Beep (Multi RF Deck
Audio Output Type)
Multi RF Deck Audio Output Type is the function that switches the output method of the received audio and beep in a
Multi RF Deck/ Multi Control Head structure to "Single Audio Output" or "Multi Audio Output".
The transceiver behaves as follows according to the configuration in Multi RF Deck Audio Output Type:
Configuration
The transceiver emits the received audio and beep of each RF Deck from the speaker of the
Control Head, from the external speaker connected to RF Deck 1, or from both according to the
configuration in External Speaker. The received audio and beep does not sound from each RF
Deck at the same time. Only the received audio and beep of a single RF Deck sounds according
to the output priority level.
Single Audio Output
Because the audio of each RF Deck can be heard without preparing multiple external speakers,
this configuration is used for the operation of Multi RF Deck/ Multi Control Head within a limited
space.
The received audio and beep of the Selected RF Deck sounds from the speaker of the Control
Head according to the configuration in External Speaker. Also, because the received audio and
beep of each RF Deck sounds from the external speaker connected to each RF Deck, the received
audio and beep of multiple RF Decks can be heard at the same time.
Multi Audio Output
Because the received audio and beep of each RF Deck can be heard at the same time from the
external speaker connected to the Control Head and each RF Deck, this configuration is used to
monitor without missing the received audio and beep of all RF Decks.
Common FUNC (K, F)/Ver 2.20
Table 16-10 Multi RF Deck Audio Output Type
Note
Output priority level is in the order: RF Deck 1, RF Deck 2, RF Deck 3 (highest to lowest).
Description
CONTENTS
288
INDEX