Table 9-3 Alternative Greases With Nlgi Class 2 For Motors Of Horizontal Construction - Siemens SIMOTICS HV M Operating Instructions Manual

Manufacturer
Addinol
FAG
For motors of horizontal construction you can alternatively use greases with NLGI class 2.
However, this reduces the lubrication interval by 20%.
Table 9-3
Manufacturer
Shell
ExxonMobil
Esso
BP
Castrol
Lubcon
Shell
FAG
NOTICE
Diminished lubrication properties by mixing greases
The lubrication properties will be impaired if you mix different greases. This can result in
material damage.
● Avoid mixing greases. Only the manufacturer can provide a guarantee for the miscibility
Lubrication data
Regreasing data are stated on the lubricant plate of the machine:
● Regreasing intervals in operating hours
● Regreasing amount in grams
● Grease type
Regrease the roller bearing at the latest every 12 months irrespective of the actual number of
operating hours.
NOTICE
Damage to roller bearings
The regreasing intervals for roller bearings are different from the servicing intervals for the
machine. The roller bearings may be damaged if the relubrication intervals are not adhered
to.
● Pay attention to the instructions on the lubricant plate.
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018
Alternative greases with NLGI class 2 for motors of horizontal construction
of particular greases.
Grease type
LM 3 EP
Arcanol Multi 3
Grease type
Gadus S2 V100 2
Unirex N2
Energrease LS2
Longtime PD2
Turmogrease L 802 EP plus
Retinax LX2
Arcanol Multi 2
Maintenance
9.1 Inspection and maintenance
93