Seal The Motor - Siemens SIMOTICS HV M Operating Instructions Manual

9.2.4

Seal the motor

Extreme caution and attention to cleanliness are vital to installation.
● Clean all bare joints between parts such as housings, bearing shields and bearing bushes
● Smear bare joints between parts with non-hardening, permanently flexible sealant, such
● Check all sealing elements, such as those on the terminal boxes, for elasticity, aging or
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018
etc., and remove old sealant material.
as "Hylomar M". Follow the manufacturer's application and safety instructions when doing
this.
damage, and renew them if they are no longer effective.
Maintenance
9.2 Corrective Maintenance
107