Safety Instructions; Introduction; Safety Indication Symbols - ABB EDS500 Series Manual

Safety Instructions

2 Safety Instructions
2.1

Introduction

Read the following chapter before mounting and commissioning a system or device of the
EDS500 series.
2.2

Safety indication symbols

The following safety indication symbols are used in this documentation:
Hazardous situation which, if not avoided, will result in death or serious injury of the
operating personnel. The provided information is necessary to know, if you configure a
EDS500 series device. The safety indication informs about a restriction etc.
Hazardous situation which, if not avoided, could result in death or serious injury of
operating personnel.
Hazardous situation, which, if not avoided, could result in minor or moderate injury.
Important information not related to personal injury but that should be observed. This
symbol is used to indicate restrictions, prerequisites, and other information that is
important for configuration.
The following safety indication symbols are used on EDS500 series devices:
Symbol
Table 2: Safety indication symbols on EDS500 series devices
1KGT150966 V000 1
Type
Warning Hazardous situation, read documentation (data sheets and
connection and settings documents)
Warning Laser, read documentation (data sheets and connection and
settings documents)
D A N G E R
W A R N I N G
C A U T I O N
A D V I C E
Level of danger
Introduction
7