Cleaning The Ice-Cube Tray - Miele KFN 37452 iDE Operating And Installation Instructions

Cleaning the ice-cube tray

Clean the ice-cube tray:
– Before switching off the ice-cube
maker for a long period of time.
– Regularly, to remove ice and water
residues.
If you have previously selected the
setting "Rinse the ice-cube
maker" (see "Rinsing the ice-cube
maker"), the ice-cube tray will already
be in the cleaning position.
The ice-cube tray  cannot be
removed and must be cleaned in situ.
For this reason the ice-cube tray must
be set to the cleaning position.
Cleaning and care
Selecting the cleaning position
The setting can only be selected if the
ice-cube maker is switched on.
 Empty the ice-cube drawer.
 Touch the settings sensor.
All symbols available for selection
appear in the display and the  symbol
flashes.
 Touch the buttons for setting the
temperature ( and ) repeatedly
until the ice-cube maker symbol 
flashes in the display.
 Touch the OK sensor to confirm the
selection.
 By touching the  and  buttons,
you can now select the setting you
want:
0: the ice-cube maker is switched off
1: the ice-cube maker is switched on
2: set the water volume
3: select the ice-cube tray cleaning
position
4: rinse the ice-cube maker
 Touch the OK sensor to confirm the
selection.
The selected setting will be applied and
you will hear the ice-cube tray rotate
into an angled position.
 Wait until the ice-cube tray has
completed this rotation before
continuing.
The ice-cube maker will then switch off.
The symbol for the ice-cube maker 
will disappear from the display.
65