Switching On And Off; Before Using For The First Time; Cleaning The Appliance; Operating The Appliance - Miele KFN 37452 iDE Operating And Installation Instructions

Before using for the first time

Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless-steel trim on the interior
shelves and door shelves in the
appliance has a layer of protective foil
to prevent scratching in transit.
 Remove this protective foil once the
appliance has been installed.

Cleaning the appliance

Please refer to the relevant
instructions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.
 Clean the ice-cube maker: after
selecting the "Rinse the ice-cube
maker " setting, the ice-cube
maker and the water supply pipework
will be rinsed automatically with
water.

Switching on and off

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").

Switching on

When the appliance is connected to the
electrical supply, the mains connection
symbol  will appear in the display
after a short while.
 Touch the On/Off sensor.
The mains connection symbol  goes
out and the appliance starts to cool
down.
The sensor controls for the available
cooling sections appear in the control
field:
The refrigerator section sensor control
is highlighted in yellow and the current
temperature in the refrigerator appears
in the display.
23