Toro Groundsmaster 7210 Series Operator's Manual page 39

Figure 33
Changing the Engine Oil And Filter
Service Interval: After the first 50 hours
Every 150 hours
If possible, run the engine just before changing the
oil because warm oil flows better and carries more
contaminants than cold oil.
1. Position the machine on a level surface.
2. Open the hood.
3. Change the oil (Figure
Figure 34
4. Replace the oil filter
34).
(Figure 35).
g029301
5. Fill the crankcase with oil; refer to
Engine-Oil Level (page
g031623
39
Figure 35
Checking the
38).
g027477