Inmail Dial Action Tables - NEC SL1000 Programming Manual

Issue 0.1 SL1000
Program 47 : InMail

47-13 : InMail Dial Action Tables

Level
IN
Description
Use 47-13 : InMail Dial Action Tables to set up the InMail Dial Action Tables. The Dial Action Table
Program
defines the options than an Automated Attendant caller can dial. A Dial Action Table is associated with
a Call Routing Mailbox, which is in turn associated with an Answer Table. When an Answer Table is
47
active, its associated Call Routing Mailbox selects the Dial Action Table which provides dialing options
to callers. The illustration below shows how this works in a default InMail system. There are 16 Dial
Action Tables.
Dial Action Table Actions
TRF Action - Screened Transfer (1) (TRF)
Use this action to allow an Automated Attendant caller to place a Screened Transfer to an extension.
After an Automated Attendant caller dials an extension, InMail calls (screens) the destination to see if
the transfer can go through.
If the destination is available, the Automated Attendant rings it. If the destination answers, the call goes
through.
If the destination does not answer during a preset interval, is busy, or is in Do Not Disturb, the Auto-
mated Attendant does not extend the call. It then provides the caller with additional options.
2-383
Programming Manual