Id Setup For Ip Trunk - NEC SL1000 Programming Manual

Issue 0.1
Level
IN
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This program refers to
incoming and outgoing IP Trunk calls. The ID is sent on an outgoing IP Trunk call. This program is
used only for H.323.
Input Data
Trunk Port Number
Item No.
01 IP Trunk ID
Conditions
• This Data is referred to at IP trunk outgoing call, or IP trunk incoming call.
• This ID is notified at IP trunk outgoing call.
• It is not notified when ID is 0.
• Incoming Call arrives to the trunk port of the same ID as ID notified from the partner system.
Feature Cross Reference
• IP Trunk - H.323
Programming Manual
Program 14 : Trunk, Basic Setup

14-11 : ID Setup for IP Trunk

Item
0~65535
(0 = No setting)
001~126
Input Data Default
SL1000
Program
14
0
2-99