NEC SL1000 Programming Manual page 37

Issue 0.1
Item Item
No.
07 NAPT 0.0.0.0 ~ 126.255.255.254
Router IP 128.0.0.1 ~ 191.255.255.254
Address- 192.0.0.1 ~ 223.255.255.254
(Default
Gateway
[WAN])
08 ICMP 0= (Enable)
Redirect 1= (Disable)
09 IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
10 Subnet 128.0.0.0
Mask 240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
11 NIC Setup 0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
5 = 1 Gbps, Full Duplex
6 = 1 Gbps, Half Duplex
Conditions
• The system must be reset for these changes to take affect.
Feature Cross Reference
• Voice Over Internet Protocol (VoIP)
Programming Manual
Input Data
192.0.0.0 224.0.0.0
248.0.0.0 252.0.0.0
255.0.0.0 255.128.0.0
255.224.0.0 255.240.0.0
255.252.0.0 255.254.0.0
255.255.128.0 255.255.192.0
255.255.240.0 255.255.248.0
255.255.254.0 255.255.255.0
255.255.255.192 255.255.255.224
255.255.255.248 255.255.255.252
255.255.255.255
SL1000
Default Description
0.0.0.0 Set the IP ad-
dress on the
WAN side of
router.
0 When receiving
ICMP redirect
message, this
determines if the
IP Routing Table
updates automati-
cally or not.
172.16.0.10 Set for IPLA.
255.255.0.0 Set for IPLA.
0 Set for IPLA.
2-17
Program
10