Single Line Telephone Basic Data Setup - NEC SL1000 Programming Manual

Issue 0.1
Program 15 : Extension, Basic Setup

15-03 : Single Line Telephone Basic Data Setup

Level
IN
Description
Use Program 15-03 : Single Line Telephone Basic Data Setup to set up various single line tele-
phone options.
Input Data
Extension Number
Item No.
01 SLT Signaling Type
Use this option to tell the system the type of
dialing the connected telephone uses.
For Analog Wireless telephones to function
correctly, this must be set to 0 (dial pulse). If
this option is set for DTMF, after an outside
call is placed, the system cannot dial any
additional digits.
This program change is automatically
performed when the Analog Wireless tele-
phone is registered. When upgrading
software from prior versions, the previous
default of 1 is saved from the prior database
so this option must be changed manually.
03 Terminal Type
Enter 1 for this option to allow a single line
port to receive DTMF tones after the initial
call setup. Enter 0 to have the port ignore
DTMF tones after the initial call setup. For
Voice Mail, always enter 1 (e.g., receive
DTMF tones).
04 Flashing
Enables/disables Flash for single line
telephones.
05 Trunk Polarity Reverse
Do Not Change Default Entry as DTMF
issues may arise with voice mail.
06 Extension Polarity Reverse
Do Not Change Default Entry as DTMF
issues may arise with voice mail.
07 Enabled On-Hook When Holding (SLT)
08 Answer On-Hook when Holding (SLT)
09 Caller ID Function - For External Module
Enable (1) or disable (0) the Caller ID FSK
signal for an external Caller ID module or a
3rd party vendor telephone with Caller ID
display.
Important:
If voice mail is used, this setting must be
disabled for the system integration codes to
be correct.
With a Single Line Tele-
phone, this must be set to 0
for incoming callers to have a
talk path.
Programming Manual
Item
0=DP
1=DTMF
0=Normal
1=Special
0=No
1=Yes
0=Off
1=On
0=Disable (Off)
1=Enable (On)
0=No
1=Yes
0=Disable (No)
1=Yes (Enable)
0= Disable (Off)
1=Enable (On)
Maximum four digits
Input Data Default
1
0
1
0
0
1
1
0
SL1000
Program
15
Related Program
15-03-03
45-01-01
15-03-01
45-01-01
11-12-45
11-12-46
2-109