Function: "Relative Dimming; Parameter Window "A: Dimming - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
4.3 Function: "Relative
dimming"
4.3.1 Parameter window "A:
Dimming"
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
Relative dimming enables the lighting to be dimmed brighter or darker via
the object "Relative dimming". A detailed description of the communication
objects can be obtained in section 4.11.
Parameter: "Time for passing from 0% to 100%"
The dimming ramp which the dimmer uses to dim to a new brightness value
can be defined here. The time for dimming from 0% to 100% brightness is
set.
Parameter: "Switch on at"
This parameter determines which brightness value is selected when the
object "Telegr. switch" receives the telegram value "1".
In the setting "Last brightness value", the brightness level that was selected
before the device was last switched off is restored. At the very least
however, the brightness value of the lower dimming limit is set.
Parameter: "Switch ON mode"
It can be set how the lighting is switched on. The following table provides an
overview:
switch on
dimming on
Parameter: "Switch OFF mode"
It can be set how the lighting is switched off. The following table provides an
overview:
switch off
dimming off
...
...
...
Switching on as quickly as possible
Switching on with the dimming ramp
Switching off as quickly as possible
Switching off with the dimming ramp
23