ABB i-bus EIB Product Manual page 14

®
ABB i-bus EIB / KNX
© 2004 ABB STOTZ-KONTAKT GmbH
Planning and application
Retrieve with delay
Brightness
20%
T
Ü
Object "1"
"Call preset ..."
Fig. 4: Retrieve a preset with delay
It can be set whether the preset value is set immediately ("jump to") or
whether the device is slowly dimmed to the value. The above example
shows the progression of the brightness after the retrieval of two presets.
The transition time T defines the period in which the lighting changes from
Ü
the old to the new brightness value.
Store preset
Set preset
Long push
button action
50%
Actuator 1
Fig. 5: Storing the current brightness value as the new preset value
The current brightness value is stored as a new preset value via the object
"Set preset ...". The user can thus adapt a lightscene for example. The
presets are stored via the following values:
Store preset1
Store preset2
Store preset3
Store preset4
70%
T
Ü
"0"
0%
Actuator 2
Object "Set preset 1/2" = 0
Object "Set preset 1/2" = 1
Object "Set preset 3/4" = 0
Object "Set preset 3/4" = 1
50%
100%
Actuator 3
14