Disassembly And Assembly Of Final Drive Assembly; 427-1510 Push Tool; Block T; Rod T - Komatsu PC210-8 Shop Manual

UEN00661-00
Disassembly and assembly of
final drive assembly
a PC210-8, PC210LC-8, PC210NLC-8
Special tools
Part number
796-427-1400 Wrench assembly
796-427-1410 • Wrench
1
796-427-1140 • Pin
01314-20612 • Screw
796T-427-1510 Push tool
790-101-2510 Block
790-101-3310 Block
J 790-101-2610 Rod
790-101-2730 Adaptor
2
01580-11613 Nut
790-101-2570 Plate
01643-31645 Washer
790-101-2102 Puller (30 t)
790-101-1102 Pump
3 796-427-1520 Installer
Disassembly
1. Oil draining
Remove drain plug and drain oil from final
drive case.
6
Final drive case: Approx. 3.5l
2. Set the final drive assembly on the block [1].
3. Remove mounting bolts to remove cover (1).
a When cover (1) is difficult to be separated,
tap the cover (1) with a plastic hammer.
4
Part name
t 1 N
1 N
3
3
t 1 N Q
t 1
t 1
t 2
t 2
t 2
t 2
t 2
t 1
t 1
t 1 N
50 Disassembly and assembly
4. Remove spacer (2).
5. No.1 carrier assembly
1) Remove No.1 carrier assembly (3).
2) Disassemble No. 1 carrier assembly as
follows.
1] Insert pin (4) and drive shaft (5) out of
carrier (6).
a After removing the shaft, remove
pin (4).
2] Remove thrust washer (7), gear (8),
bearing (9), and thrust washer (10)
from carrier (6).
PC210, 230, 240-8