Display Relay Element Setting [Disp. (Set.)] - Mitsubishi Electric MELPRO S Series Operation Manual

4.5. Display Relay Element Setting [DISP. (SET.)]

The current setting of the relay element can be read out by "DISP. (SET.)".
By turning Switch-3, each setting value can be read out.
Even though the Switch-3 set to "PASSWORD" (position 15), the current password does not be indicated.
Turn Switch-1 to "DISP
(SET.)" (position 5).
The setting value linked in
Switch-3 position is indicated.
The indicated data is current
setting value.
By turning Switch-3, each
setting value can be checked.
26 / 47 JEP0-IL9537