Mitsubishi Electric MELPRO S Series Operation Manual page 20

Next, the figure three (3)
which means 3 rd new
phenomenon is indicated.
Even when you are turning
Switch-2, the displaying
phenomenon goes to next
order.
In this case, V of 3 rd new
BC
phenomenon is indicated.
After the indicating the oldest
phenomenon in the save data,
it goes back to latest (1 st )
phenomenon.
Above sequence is repeated.
When you would like to check
again or read out other phase
value, Switch-2 is turned.
In this case, VAB of 1 st
phenomenon is indicated.
20 / 47 JEP0-IL9537