Mitsubishi Electric MELPRO S Series Operation Manual page 19

Measured value when the
relay element was operation is
indicated on 7-seg LED.
Indicate value according to
position of Switch-2.
Next, the figure two (2) which
means 2 nd latest phenomenon
is indicated.
Measured value when the
relay element was operation is
indicated on 7-seg LED.
The indicating period of one
phenomenon is 1 second.
The corresponding value of
the selected phase with
Switch-2 is indicated.
If you turn Switch-2 until
going to next phenomenon,
measured value of this
phenomenon is indicated.
In this case, V of 2 nd
BC
phenomenon is indicated.
19 / 47 JEP0-IL9537