Software Update; Preparation - Mitsubishi Electric AE-200A Instruction Book

11. Software update

The AE-200/AE-50/EW-50 software can be updated by either directly reading the update file in a USB memory
device or by using a Web browser.
① Directly reading the update file in a USB
memory device
USB
This manual explains how to update the software using a Web browser ( ② ). For how to update the software by
directly reading the update file in a USB memory device ( ① ), refer to the AE-200 Instruction Book or Installation
Manual.

11-1. Preparation

Follow the instructions below to change the IP address of the PC that is used for software update.
Note: When the system is connected to the existing LAN, ask the system administrator for permission before changing the IP
address settings and updating the software.
(1) Click [Control Panel] in the Start menu, and click [Network and Sharing
Center]>[Local Area Setting].
In the [Local Area Connection Status] window, click [Properties].
(2) Click [Internet Protocol Version 4 (TCP/IPv4)] to select it, and click
[Properties].
WT07138X02
② Using a Web browser
PC for update
USB
CD
71
LAN
HUB