7-3-2. Making the interlocking action settings
(1) Setting an Output Unit Type and Actions
Select an Output Unit Type and set the Actions, referring to the table below.
Output Unit
Output
Type
unit icon
Group
Free Output
Points
*1 The available setting options vary, depending on the connected indoor unit model.
Make the interlocking action settings that are available for the output units.
*2 Only the items "ON/OFF" and "Prohibit Remote Controller Operation (ON/OFF and Set Temp.)" can be selected for Air To Water
(PWFY) units. Only the item "ON/OFF" can be selected for HWHP (CAHV, CRHV) units.
*3 The Setback mode can be selected on the AE-200A/AE-50A/EW-50A, but not on the AE-200E/AE-50E/EW-50E.
WT07138X02
Table 7-2 Interlocking action settings
Setting item
*2
ON/OFF
Mode
*1
*1
Set Temp.
Air direction
*1
*1
Fan speed
Prohibit Remote Controller
Operation (ON/OFF)
Prohibit Remote Controller
Operation (Mode)
Prohibit Remote Controller
Operation (Set Temp.)
ON/OFF
61
Actions
Setting options
ON, OFF
Air conditioning unit group:
Cool, Dry, Fan, Heat, Auto, Setback
LOSSNAY unit group:
Bypass, Heat Recovery, Auto
Desired temperature
Mid3, Mid2, Mid1, Mid0, Horizontal, Swing, Auto
Low, Mid2, Mid1, High, Auto
Permit, Prohibit
Permit, Prohibit
Permit, Prohibit
ON, OFF
*3