Mitsubishi Electric AE-200A Instruction Book page 57

Shown below are eight examples of Interlocked operations.
Example 1: Interlocked operation of indoor unit and card key via a DIDO controller
② Signal indicating the card
key has been removed
AE-200
③ Signal to stop the indoor
unit
Example 2: Interlocked operation of operation mode between indoor units
② Signal indicating the operation mode for the
indoor unit #1 has changed to fan mode
AE-200
③ Signal to change the
operation mode for the
indoor unit #2 to fan
mode
Example 3: Interlocked operation of indoor unit and window through the free contact on an indoor unit
② Signal indicating the
AE-200
③ Signal to stop the indoor
unit
Example 4: Interlocked operation of indoor unit, lighting, and card key through the free contact on an indoor
unit
② Signal indicating the card
key has been removed
AE-200
③ Signal to stop the indoor
WT07138X02
DIDO controller
(PAC-YG66DCA)
window has been opened
① The card key status is input
to the free contact (CN32).
unit and turn off the
lighting
① The card key status is input
through the contact.
Indoor unit
① The operation mode has changed
from heating to fan mode.
Indoor unit #1
(conference room No.1)
Indoor unit #2
(conference room No.2)
① The open/close status of the window is
input to the free contact (CN32).
Indoor unit
Indoor unit
④ Signal to turn off the lighting
via the free contact
57
Card key
Remote
controller
Window
Card key
Lighting