Mitsubishi Electric AE-200A Instruction Book page 67

(3) Click the functions to be made available for building managers. The rectangular icons next to the selected
functions will appear in yellow-green.
Click again to deselect. The rectangular icons next to the deselected functions will appear in gray.
For more information on each function, refer to Table 8-1.
Note: If the user logs in as a building manager, the currently available functions can be checked, but cannot be changed.
Note: The settings on this screen will not be reflected to the functions on the AE-200/AE-50's LCD.
Initial Settings
Functions 1
Functions 2
Functions 3
*1 At factory shipment, these settings by the building managers are prohibited.
(4) Click [Save Settings] to save the settings.
WT07138X02
Table 8-1 Available Function List
Function
Date and Time
*1
Basic System
Group Name
Groups
Group Structure
*1
Interlocked LOSSNAY
Block Name
Blocks
Block Structure
*1
E-Mail
System Settings
Peak Cut
Control Details
Measurement
Energy Management Settings
Set Temperature Range Limit
Night Mode Schedule
System-changeover
External Temperature Interlock
Night Setback Control
Interlock control
AHC Port Name Settings
Refer to section 4-1 for details.
Refer to section 4-2 for details.
Refer to section 4-3 for details.
Refer to section 4-4 for details.
Refer to section 4-5 for details.
*1
Refer to section 5-1 for details.
Refer to section 5-2 for details.
Refer to section 5-3 for details.
Refer to section 5-4 for details.
Refer to section 6-1 for details.
Refer to section 6-2 for details.
Refer to section 6-3 for details.
Refer to section 7-1 for details.
Refer to section 7-2 for details.
Refer to section 7-3 for details.
Refer to section 7-4 for details.
67
Content