Character Entry Per Trigger: Sin - Panasonic LP-GS Series Serial Communication Command Manual

3-5-3 Character entry per trigger: SIN

When "Characters specified by SIN command" is set for character objects or barcode/2D code objects, input characters
with this command. Send this command per each marking.
⿎ Setting request data
Start
SIN
code
⿎ Data description
Name
(> Name in LP-400/V)
String No.
(> Serial data No.)
Marking character
Total data length
• Refer to "2-3-5 Character data input method" (P.37) for details on the character input method and character types with
input restrictions.
• To use this SIN command, set "Characters specified by SIN command" of the functional character to the file in Laser
Marker NAVI smart beforehand.
• When the file with "Characters specified by SIN command" function is selected, transmit this command by every marking
triggers. Otherwise marking trigger ready does not turn ON, and marking is not available.
• Characters specified by SIN command cannot be set together with the following functions in one file.
• Registered characters (via I/O)
• External offset function by I/O
• On-the-fly marking at regular intervals
• On-the-fly marking with multiple triggers
• SIN command can be accepted even without marking character data.
⿎ Example of command settings
Condition: String No. = 0, Marking character = abcd
• Setting
Transmission data
Condition: String No. = 0, No marking character (blank)
• Setting
Transmission data
72
[String No.] [Marking character]
S
Max. 200-byte
Data length
[byte]
2 "00"–"15"
The number of input characters allowed
Min. 0 is max. 99 characters.
Max. 198 Input Method: either ASCII code or
Shift JIS code (can not be mixed)
Max. 200 Variable length.
[STX]
[STX]
Data contents
SIN S 00abcd
SIN S 00 [CR]
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
Remarks
If the string No. is not set in the selected
file, the SIN command can not be
accepted.
• The ASCII code and Shift JIS code
can not be mixed in one command.
• Including these characters, max.
299 digits of characters in total can
be set in one character object or
barcode/2D code object.
[CR]