Panasonic LP-GS Series Serial Communication Command Manual page 48

⿎ Change the marking characters for each marking
1. Laser pumping (ON)
2. File selection by number
3. Shutter open
4. Status checking
*3, *4
5. Character entry
(Send before every trigger input)
6. Status checking
7. Marking trigger
8. Shutter close
9. Laser pumping (OFF)
48
Remote mode ON
Shutter status: OPEN
Yes
Marking trigger ready: ON
Yes
Send next marking data
No: Finish operation
Remote mode OFF
ME-LP-GS-SR-COMP-3
*1, *2
LSR command
FNO command Select the marking file with SIN
command enabled.
SHT command
STS command
No.
SIN command
STS command
No.
MRK command
Yes
SHT command
LSR command