Panasonic LP-GS Series Serial Communication Command Manual page 35

Response
Error cause
code
"18" Unacceptable command because laser pumping is off or not completed.
• SPT command for starting radiation request is sent when laser pumping is not ready.
• LP-RC series only: SHT command for opening shutter request is sent when laser pumping is off.
"19" • Unacceptable command with current settings of trigger mode.
• Unacceptable command with the on-the-fly marking.
"99" Others
Example of negative response
Start code Data example:
NAK
15
Check sum
"06"
30 36 37 42
ME-LP-GS-SR-COMP-3
End code
CR
0D (HEX)
35