Panasonic LP-GS Series Serial Communication Command Manual page 102

⿎ Example of command settings
Condition: When the linefeed is enabled
Object No. = 1, Positional offset target = 1, Relative X-position = 10, Relative Y-position = -5.5,
Character height = 3, Character width = 3, Character spacing = 3, Font No. = 2,
Laser power correction = 100, Scan speed correction = 200, Pulse cycle correction = 100,
Linefeed = 1, Linefeed spacing = 3.5
• Setting
Transmission data
• Readout
Transmission data
Response data
Condition: When the linefeed is disabled
Object No. = 1, Positional offset target = 1, Relative X-position = 10, Relative Y-position = -5.5,
Character height = 3, Character width = 3, Character spacing = 3, Font No. = 2,
Laser power correction = 100, Scan speed correction = 200, Pulse cycle correction = 100,
Linefeed = 0
• Setting
Transmission data
• Readout
Transmission data
Response data
102
11+010.000-005.500003.000003.000003.000
[STX] BRV S
21002001001003.500
[STX] BRV R 1
11+010.000-005.500003.000003.000003.000
[STX] BRV A
21002001001003.500
11+010.000-005.500003.000003.000003.000
[STX] BRV S
2100200100
[STX] BRV R 1
11+010.000-005.500003.000003.000003.000
[STX] BRV A
21002001000
ME-LP-GS-SR-COMP-3
[CR]
[CR]
[CR]
[CR]
[CR]
[CR]