2Work After Making Checks/Adjustments - Canon Finisher-R1 Installation Procedure

4) Fit the pliers in place to the back of the front cover using a screw.
5) End the installation work by referring to the instructions in "Work After Making Checks/Adjustments."
1.4.2 Work After Making Checks/Adjustments
<Finisher-R1>
1) If you removed the auxiliary ring, attach the left rear foot cover; then, adjust the auxiliary rail to suit needs of the
user, and mount it in place using 4 screws.
2) Mount the front cover to the finisher using 3 screws.
3) Mount the rear upper cover (small) to the finisher using a screw.
4) Mount the front foot cover [1] using a screw [2] (RS tightening ; M3x8).
[1]
F-1-36
[2]
[1]
F-1-37
[2]
90
Chapter 1
0003-1770
21